Products

BL200a Single Port Gige Tester / Gigabit Ethernet Tester


The BL200a is the worlds first Gigabit Ethernet Tester and has many feature rich benefits such as:

  • Powerful built-in PACKET CAPTURE and analysis functions regarding all packets, filtered or event triggered option is supported by the BL200A Gige Tester.
  • The Bl200A Gige Tester includes: Throughput testing, Generate multistream traffic up to 1Gbit/s line rate on copper and optical multi-ports, Ethernet frames, IP packets layer 1/2/3/4 with multiple modes such as continuous, ramping, burst mode.
  • Cable BERT (Bit Error Rate Testing) on copper port, BERT in Unframed mode on fiber optical port.
  • This advanced single port Gigabit Ethernet Tester supports packet analysis such as FCS errors, L3/L4 checksum errors, Round Trip Delay (RTD), Packet Arrival Interval (PAI), packet loss, sequence errors.
  • IP application test such as Ping, ARP, Trace Route, DNS, and DHCP.
  • RFC2544:The BL200A Gigabit Ethernet Tester's RFC2544 network benchmark testing supports throughput, latency, frame loss, and back-to-back frames without loss, all varying frame sizes defined in RFC 2544 standard on optical 1G/100FX and copper 10/100/1000 BASE-T.
  • The BL200A Gige Tester supports packet statistics measurement such as utilization, VLAN, control frame and packets, uni/multi/broadcasts, fewer than 64 byte (runt) frame, jumbo frame with global and filtered.
  • Cable diagnostics (TDR) such as cable fault, irregular impedance, cable length is built in this advanced Gige Tester.
  • Loopback testing at layer 2 (MAC) and layer 3 (IP).
  • Configurable QoS such as CoS, TOS, and DSCP.
  • Optical power measurement.
  • Simplifies the troubleshooting of IPTV services at the residential gateway.
  • File Manager: Copy test results, test log files, screen capture files, and configuration files into USB memory card.

Type 10GE (XFP) Port 1 RJ45 SFP Port 2 RJ45 SFP
BL200A
BL400A
BL1000A (1 port)
BL1400A (1 port)
BL2000A (2 port)

RJ45 port: for 10/100 1000 Base-Tx Interface
SFP port: for 100M FX or 1G-SX/LX Interface
XFP port: for 10GE interface.

Key Benefits and features of the BL200A Gige Tester / Gigabit Ethernet Tester:

  • The Bl200A Gigabit Etehrnet Tester includes a hybrid user interface (UI) with graphical color touch-screen and also keypad at the same time, user-friendly.
  • Supports multi-physical ports such as 1 fiber 100FX, 1000 BASE-SX/LX/ZX, and 1 copper 10/100/1000 BASE-T on one platform.
  • Supports multi-stream traffic generation and analysis including layer 1/2/3/4 packets and fully customized packets with BERT.
  • Supports built-in PACKET CAPTURE and analysis functions with all packets and filtered option on dual ports or one port.
  • RFC2544: The BL200A's Gigabit Ethernet Tester's RFC2544 network benchmark testing supports throughput, latency, frame loss, and back-to-back frames without loss, all varying frame sizes defined in RFC 2544 standard on optical 100FX, 1000 SX/LX/ZX and on copper 10/100/1000 BASE-T.
  • Statistics measurement such as utilization, VLAN, control frame and packets, uni/multi/broadcasts, under 64 Byte frame, Jumbo frame and etc are supported by the BL200A Gige Tester.
  • Supports filtering measurement such as Jitter, Round Trip Delay, Packet Arrival Interval (PAI), Checksum error, Duplication error.
  • Supports media converter function between optical and copper physical port.
  • Ethernet and IP advanced connectivity testing such as ARP, Ping, Trace Route, DHCP, and DNS.
  • This advanced Gige Tester supports cable diagnostics. It utilises TDR to detect and identify cable faults, perform estimation cable length, identify irregular impedance on metallic paired cable, twisted pair.
  • Precise loopback testing at layer 2 (MAC) and layer 3 (IP).
  • Powerful Ethernet network troubleshooting tool kit and performance measurement tool kit.
  • The BL200A Gigabit Ethernet Tester allows users to upload and download a new software version and test results via FTP.
  • File Manager: Be able to copy testing results, log files, screen capture files, and configuration files to USB memory card.

Specifications:

Ports:
1 optical SFP 1000 BASE-SX/LX/ZX and 100 FX.
1 copper 10/100/1000 BASE-T.
Auxiliary RJ45 10/100 Mbit/s Ethernet port.
USB (Universal Serial Bus).

Dimensions:
Size: 172.5 x 227 x 58.5 (mm)
Weight: 1.3(kg) with battery.
Battery - 0.3 (kg)

User Interface:
5.7 color TFT-LCD display screen

Power:
DC adaptor: 14 V to 21 V
Removable/Rechargeable lithium ion batteries
Battery life: 3 hour typical, 8 hour in standby mode

Memory:
2GByte SD Card™ card included